Compliance · Mock recalls

Run a mock recall in minutes, not a day

Auditors, customers and regulators all ask the same question: where did this lot come from, and where did it go? LOT AXIS links every input, output and customer as product moves, so a mock recall is a search and a report, not an afternoon of pulling files.

QA room with records and a stopwatch
One lot, both directions
Input lots and packaging
The lot you picked
Every other lot sharing inputs
Every customer who received it
Back, forward and a quantity check
The rule in brief

Who asks for a mock recall

No federal rule says "run a mock recall". The recall plan is the law. The drill is how audits and buyers test it.

FDA and FSIS

A written recall plan

FDA (21 CFR 117.139) requires a written recall plan for foods with a hazard needing a preventive control. FSIS (9 CFR 418.3) requires written recall procedures.

Audit schemes

Tested on a schedule

SQF and BRCGS: at least once a year. PrimusGFS: every six months. BRCGS expects the trace, with a mass balance, within 4 hours.

Buyers and FDA

Records on request

For FSMA 204 foods, FDA can ask for records within 24 hours as a sortable spreadsheet. In FDA's 2026 drills, only 40% of firms had the right lot code at every step.

4 hoursThe BRCGS expectation for a full trace with a mass balance. With the records already linked in LOT AXIS, the trace itself takes minutes.
Requirement by requirement

What a mock recall tests, and where LOT AXIS does it

The steps every scheme expects, matched to how LOT AXIS answers each one.

What the rule asks for
How LOT AXIS covers it

Pick a real lot

Choose a finished lot that shipped a few weeks ago, ideally one with rework or several inputs.

Good practice

✓Find any lot by lot number, serial, order or product. Nothing has to be pulled from a binder first.

Trace back

List every input lot: raw material, ingredients, rework, and primary packaging and labels.

BRCGS 3.9 · SQF

✓Backward trace lists every generation of input lots back to receiving, with suppliers, dates and quantities.

Trace forward

Find every customer who received the lot, and every other lot that used the same inputs.

BRCGS 3.9 · SQF

✓Forward trace lists every lot made from the inputs and every shipment, with customer, date and quantity.

Mass balance

Compare what was produced with what was shipped, used and still on hand.

BRCGS 3.9 · PrimusGFS 1.07.03

✓Quantities come with the trace: received, produced, shipped and still in inventory by location, so the percentage accounted for is arithmetic, not guesswork.

Contact list

A current contact for every customer on the forward list.

21 CFR 117.139

✓The forward trace gives a complete customer list with ship dates and quantities to hand to whoever makes the calls.

Write it down

Start and finish times, scenario, amount produced and located, percent located, gaps and owners.

PrimusGFS 1.07.03

✓Print the trace report and attach it to your mock recall record.

See it in the software

What it looks like in LOT AXIS

Real LOT AXIS screens and reports, shown with sample data.

LOT AXIS Traceability View showing backward and forward trace for one lot (sample data)
Click to enlarge

Start from any lot

Enter a lot and get the backward trace to every input and the forward trace to every customer.

LOT AXIS Recall screen showing a sample mackerel recall, its status, lot number, actions, dates, and affected-record tabs.
Click to enlarge

Log the recall in LOT AXIS

Record the cause, action, outcome and preventative steps, start from a lot, serial, pallet or order, and see every lot, product, order, customer and vendor it touched.

LOT AXIS FSMA 204 Chain of Custody report pages: backward trace, forward trace, still in inventory (sample data)
Click to enlarge

Hand over the record

Attach the printed trace report to your mock recall record.

LOT AXIS inventory filtered to one lot, grouped by storage location, with total count and the Lot Traceability report (sample data)
Click to enlarge

What's still on hand

Inventory filtered to one lot, grouped by location, with the count and the Lot Traceability report to print or share.

Questions

Mock recall questions we hear most

Is a mock recall required by law?

Not by name. FDA and FSIS require written recall plans or procedures. Audit schemes and most buyers require you to test them, usually at least once a year.

How long should a mock recall take?

BRCGS expects the trace with a mass balance within 4 hours. With LOT AXIS the trace itself takes minutes. Most of your time goes on counting stock and calling customers.

Which lot should we pick?

Your hardest one: a product with rework, shared ingredients or mixed pallets. An easy lot only proves the easy path works.

Can it trace packaging and labels?

Anything received as a lot and scanned into production is part of the trace. Talk to us about how your packaging is received today.

What does a demo look like?

Bring one lot you shipped last month. In 30 minutes we run a mock recall on it with you in LOT AXIS.

Reading

Go deeper

Plain-English guides from the LOT AXIS Knowledge Center.

Mock recalls

Run a Mock Recall This Afternoon: A Two-Hour Exercise and What to Write Down

Read
Recall readiness

Food Recall Readiness: How Fast Could Your Business Respond to a Recall?

Read
Recall causes

Foreign Material and Undeclared Allergens: The Two Biggest Recall Causes Are Label and Lot Problems

Read

General information, not legal or certification advice. Confirm your obligations against 21 CFR 117, 9 CFR 418 and the current edition of your certification scheme.

Bring one lot. We'll run the mock recall with you.

In a 30-minute demo we trace a lot you shipped last month, back to every input and forward to every customer, with quantities.

Scroll to Top